Back to Blog
Comparisons 2026-11-17 Eco Friendly Glass Containers - Glasslock 0 views

Square Lids vs Rectangle Lids: Matching Glasslock Containers

Square Lids vs Rectangle Lids: Matching Glasslock Containers

Square and rectangle Glasslock lids cost the same and follow the same model-number rule. Here is how to tell which shape and size your container needs before you order.

The shape has to match before the size does

Square lids and rectangle lids are sold as separate replacement parts, and the first thing to settle is which one your container was built for. A square lid is not a stretched rectangle lid, and a rectangle lid is not a trimmed square one. The supplied records for both parts point to the same sizing rule: lid sizes correspond to the model number on the bottom of your glass container, made up of letters followed by the first three digits.

That rule does more work than a visual guess. Lids are listed by model number rather than by measured length and width, so the bottom stamp is the reliable link between your container and the correct part. If you are deciding between the two shapes, start by checking whether your container's footprint is square or rectangular, then read the model number before you compare anything else.

Square lids and rectangle lids side by side

On the supplied evidence, the two parts differ by container shape rather than by price or construction claims. Both are listed at the same catalog price, both follow the model-number rule, and both are replaced as complete lids.

  • Container shape: Square Lids are the replacement part for square Glasslock containers; Rectangle Lids are the replacement part for rectangular ones. Match the lid family to the container footprint first.
  • How size is chosen: Both parts use the model number on the bottom of the container (letters followed by the first three digits). The same rule applies to either shape, so you do not need a different method for square versus rectangle.
  • Catalog price: Both Square Lids and Rectangle Lids are listed at USD 0.62, with a catalog comparison price of USD 1.00. Shape does not create a price difference in the supplied records.
  • What a replacement includes: Both are supplied as whole lids. The gaskets are not available as a separate replacement part at this time, and the store can only replace the whole lid, not just the silicone gaskets.
  • Color: The color of the lid and/or silicone gasket may vary on either part. Treat color as something that may differ from your original rather than a fixed match.

Square Lids: the supplied fit and replacement facts

  • Square Lids: Lid sizes correspond to the model number located on the bottom of your glass container (letters followed by the first three digits). This is the sizing method for square lids, so the bottom stamp is what you check before ordering rather than a measured width.
    Square Lids
    Square Lids
  • Square Lids: The gaskets are not available as a separate replacement part at this time, and the store can only replace the whole lid, not just the silicone gaskets. If the silicone gasket is the worn part, the practical replacement is a complete square lid, not a gasket on its own.
  • Square Lids: The color of the lid and/or silicone gasket may vary. A replacement square lid may not match the color of the lid already on your container.

Rectangle Lids: the supplied fit and replacement facts

  • Rectangle Lids: Lid sizes correspond to the model number located on the bottom of your glass container (letters followed by the first three digits). Rectangle lids use the same model-number rule, so a rectangular container is matched by its stamp, not by comparing lid outlines.
    Rectangle Lids
    Rectangle Lids
  • Rectangle Lids: The gaskets are not available as a separate replacement part at this time, and the store can only replace the whole lid, not just the silicone gaskets. A worn gasket on a rectangular container means ordering a complete rectangle lid rather than a gasket alone.
  • Rectangle Lids: The color of the lid and/or silicone gasket may vary. Rectangle replacements can arrive in a different lid or gasket color than the original.

How to pick the right lid in three checks

The sequence below follows the supplied sizing rule. It keeps you from ordering a lid that is the right shape but the wrong size, or the right size in the wrong shape.

  1. Check the container footprint: Decide whether the container is square or rectangular. That tells you whether you are shopping Square Lids or Rectangle Lids.
  2. Read the model number on the bottom: Find the letters followed by the first three digits. That model number is what the lid sizes correspond to, for either shape.
  3. Confirm the lid is in stock: Items marked Out of Stock are temporarily unavailable and are not discontinued unless otherwise stated. If your size is out of stock, check back periodically rather than assuming the part is gone.

What the supplied records do not tell you

The supplied information does not list lid dimensions, so you cannot choose between a square and rectangle lid by measuring a lid you already own and comparing numbers. It also does not confirm which specific container models each lid size corresponds to; the model number on your container is the intended link.

The records do not describe how to remove or fit a lid, how to clean it, or any load, stacking, freezer, microwave or oven limits. Those details are not confirmed by the supplied information, so treat them as questions to check separately rather than assumptions to build into your order.

One limitation is worth planning around: because gaskets are not sold separately at this time, a lid with a worn gasket is a whole-lid replacement. That applies equally to square and rectangle lids, so the shape comparison does not change the replacement approach.

Related Articles

Customer Service
Home
Products
Cart
Profile