Find the model number before you order
Before you buy a replacement round lid, turn your glass container upside down. The model number is on the bottom, and it starts with letters followed by the first three digits. That code is the key to getting a lid that fits.
Lid sizes correspond to that model number, so a lid for one round container may not fit another. Write the code down and use it when you order. If the number has worn off, measure the rim and compare it with the lid you have, but the printed code is the most reliable match.
What the round lid replacement includes
- Round Lids: Lid sizes correspond to the model number located on the bottom of your glass container (letters followed by the first three digits). This is the matching rule: use the model code, not the container's apparent width, to choose the right round lid.

Round Lids - Round Lids: The gaskets are not available as a separate replacement part at this time. If the seal is the problem, you cannot fix it by buying only a gasket; plan to replace the whole lid.
- Round Lids: We can only replace the whole lid, not just the silicone gaskets. Ordering a complete lid is the supported route for a worn or missing seal.
How to fit a round lid on your container
Once the new lid arrives, check it against the container before you store food. The steps below use only the supplied fit information; they do not add pressure tests or sealing instructions that are not in the catalog.
- Check the model code: Confirm the code on the container bottom matches the code you used to order the lid.
- Inspect the lid and gasket: The color of the lid and/or silicone gasket may vary, so a different color is not a defect. Make sure the gasket is seated in the lid.
- Place the lid on the rim: Set the round lid evenly on the container opening before pressing down.
- Press around the edge: Work around the rim with your fingers to seat the lid. The supplied information does not specify a pressure or a leak-test method, so stop if the lid does not sit flat.
Why the whole lid is the replacement part
Glasslock round lids are sold as a complete unit, and the gasket is not offered as a separate part at this time. That matters when the silicone seal looks stretched, discolored, or no longer sits properly: the supported fix is a new lid, not a new gasket.
The color of the lid and/or silicone gasket may vary from the original. Treat a color difference as normal variation, not a sign that the lid is wrong. The fit still depends on the model code, so keep that code with your order records.
Round lid care and storage tips
The supplied product information does not include washing temperatures, dishwasher instructions, or a lid warranty. Use the care guidance that came with your container and keep these practical habits in mind.
- Keep the gasket seated: Check that the silicone ring is fully in its channel before storing food; a loose gasket is a common reason a lid feels off.
- Store lids flat or loosely stacked: Avoid pressing heavy items onto the lid, which can distort the gasket over time.
- Match lids to containers: Keep the model code with the lid so you can identify it later; round lids are sized to specific models.
- Replace the whole lid when the seal fails: Because gaskets are not sold separately, a worn seal means a new lid is the supported replacement.
Round lid at a glance
- Round Lids: Round Lids are available in the Standard variant. The Standard option is the listed variant; choose it when ordering a replacement round lid.
- Round Lids: The color of the lid and/or silicone gasket may vary. Set expectations: a replacement lid may not match the original color exactly.
What to do if the lid does not fit
If a new round lid does not sit flat, recheck the model code on the container bottom against the code you ordered. A mismatch is the most likely cause, since lid sizes correspond to that code. If the code matches and the lid still will not seat, inspect the gasket for folds or misalignment before using the container.
The supplied information does not cover every container model or every lid variation, so it cannot confirm fit for a code that is not listed. When in doubt, use the model number as your reference point rather than the container's diameter alone.

